- Stock: In Stock
- Brand: Fuji
- Model: EF241120WJ1074
For the SMT industry, Fuji mounter FUJI is a relatively cost-effective machine, NXT belongs to the FUJI FUJI is the masterpiece of the mounter, from 2004 to now in 2014, NXT has been very mature. In NXT's working head, there is an accessory, belongs to the wearing parts, A5053C, also known as A5054X, is an O-ring, also known as sealing ring, used in NXT's H12S working head, also used in the H12 working head, H12HS working head, V12 working head, the working head, also known as the mounting head. So many working head need to use A5053C, A5054X, the most vulnerable to wear is also this NXT accessories, but in FUJI accessories is very small, the unit price is relatively cheap, a NXT mounting head H12S only with 72 A5053C, or A5054X. a mechanical valve SPOOL inside, there are 6 such seals A5053C, A5054X, if H04HHS, H12HS, V12 working head, working head is also known as the mounting head. A5054X, if H04S there are 24. If H08 head there are 48.
XP Strobe Light
Product name: XP strobe light
English name: DISCHARGE LAMP
Material No.: DEEM5392
Use: XP
How to distinguish between SMT FUJI Fuji original parts and imitation parts:
Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth suction nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.
Imitation:
Poor material, not wear-resistant, shorter service life;
Poor precision, which has an impact on the quality of the mounting;
Smaller suction nozzle holes, easy to plug the holes, resulting in insufficient vacuum, poor pick-up, throwing material serious;
Reflective effect is poor, recognize the nozzle is easier to cause recognition error.
XPF machine, belonging to FUJI Fuji in 2008 launched the market of high-speed composite mounter, it has a small size, speed, applicability, high productivity, simplicity of operation, cost-effective and high advantages.
The main parameters of XPF are as follows.
Mounter speed: 25000 cph (12 nozzle) ; 9000 cph (1 nozzle)
Patch accuracy: +/- 0.050mm @3 sigma (chip); +/- 0.040mm @3 sigma (QFP).
Board size: 50 X 50mm -- 457 X 356 mm
Component size: 01005 X 20 mm (12 nozzle) ; 0402 X 150 mm (1 nozzle)
Fuji XPF placement accuracy:
Rotary auto change head: Small chip: ±0.05mm (3 sigma) cpk≥1.00
QFP components: ± 0.04mm (3 sigma) cpk ≥ 1.00
Single nozzle: small chip: ± 0.04mm (3 sigma) cpk ≥ 1.00
QFP components: ± 0.03mm (3 sigma) cpk ≥ 1.00
Dispensing automatic replacement head: dispensing position accuracy: ±0.1mm (3 sigma) cpk≥1.00