NXT Feeder Connector RH02471

For the SMT industry, Fuji mounter FUJI is a relatively cost-effective machine, NXT belongs to the FUJI FUJI is the masterpiece of the mounter, from 2004 to now in 2014, NXT has been very mature. In NXT's working head, there is an accessory, belongs to the wearing parts, A5053C, also known as A5054X, is an O-ring, also known as sealing ring, used in NXT's H12S working head, also used in the H12 working head, H12HS working head, V12 working head, the working head, also known as the mounting head. So many working head need to use A5053C, A5054X, the most vulnerable to wear is also this NXT accessories, but in FUJI accessories is very small, the unit price is relatively cheap, a NXT mounting head H12S only with 72 A5053C, or A5054X. a mechanical valve SPOOL inside, there are 6 such seals A5053C, A5054X, if H04HHS, H12HS, V12 working head, working head is also known as the mounting head. A5054X, if H04S there are 24. If H08 head there are 48.

NXT Flyer Connecting Wire

Product name: NXT Fidelity connection line
English name: HARNESS
Material number: RH0247
Use: NXT

How to distinguish between SMT FUJI Fuji original parts and imitation parts:

Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.

Imitation:
Poor material, not wear-resistant, shorter service life;
Low precision, which has an impact on the quality of the mounting;

Examples:

GFSY3311, XP243E Y-axis screw, similar material number GFSY3310, DESY3010, DNSY3900, GFSY1020, XP143E Y-axis screw.

Original brand new:
1, the original must have the original manual, the certificate states the parameters of the silk rod, the results of the test.

2, the original brand-new silk rod, the middle nut, W2513C-6PGX-C5Z50, which is marked with the production time, production batch. Generally speaking, the last one or two years are likely to be the real original brand-new, if more than 5 years, must be refurbished.

3, the original screw, the nut in the center, the size of the font has two kinds, because the NSK manufacturer has two, the two manufacturers of the font size is not the same, but the shape of the font is the same.

4, the original brand-new screw, two processing workmanship, surface finish, reflectivity, and after the installation of the sound, can be heard, and imitation / refurbished is very different.

5, the original brand-new screw, installed in the machine, do servo excessive test, can be seen, the curve is very perfect.

Refurbished, or replacement NSK screws.

1, the font of the center nut is fuzzy, or the font and the original is not the same

2, no original factory inspection certificate

3、Service life is not long

4, the bearing position of the two ends of the screw, the processing is very rough.

5, after installation, test servo over-testing, it can be clearly found, each time the back and forth, the curve is different.

The suction nozzle hole is small, it is easy to block the hole, resulting in insufficient vacuum, poor pickup, throwing material serious;
Reflective effect is poor, recognizing the suction nozzle is easier will cause recognition errors.