NXT W08C Feeder Sensor PZ02392

For the SMT industry, Fuji mounter FUJI is a relatively cost-effective machine, NXT belongs to the FUJI FUJI is the masterpiece of the mounter, from 2004 to now in 2014, NXT has been very mature. In NXT's working head, there is an accessory, belongs to the wearing parts, A5053C, also known as A5054X, is an O-ring, also known as sealing ring, used in NXT's H12S working head, also used in the H12 working head, H12HS working head, V12 working head, the working head, also known as the mounting head. So many working head need to use A5053C, A5054X, the most vulnerable to wear is also this NXT accessories, but in FUJI accessories is very small, the unit price is relatively cheap, a NXT mounting head H12S only with 72 A5053C, or A5054X. a mechanical valve SPOOL inside, there are 6 such seals A5053C, A5054X, if H04HHS, H12HS, V12 working head, working head is also known as the mounting head. A5054X, if H04S there are 24. If H08 head there are 48.

NXT Fidelity Sensor

Product Name: NXT Fidelity Sensor
English name: MICRO SW
Material No.: PZ0239
Use: NXT

How to distinguish between SMT FUJI Fuji original parts and imitation parts:

Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.

Imitation:
Poor material, not wear-resistant, shorter service life;
Poor precision, which has an impact on the quality of the mounting;
Smaller suction nozzle holes, easy to plug the holes, resulting in insufficient vacuum, poor pick-up, throwing material serious;
Reflective effect is poor, recognize the nozzle is easier to cause recognition error.

NXT machine, belonging to FUJI Fuji in 2004 launched the market module type high-speed multifunctional mounter, it has a small size, speed, applicability, high productivity, simplicity of operation, cost-effective and high advantages.
NXT machines are not limited to the old concept of "mounter", but are the product of the pursuit of holistic solutions in the era of reform to create a new "new SMT production line system concept" for the purpose of the product. The new system is a new type of mounter that utilizes a wide range of sensing functions for placement reliability and quality control, using new technology to cope with a wide range of production variants.
Depending on the type of module, NXT machines are available in two types, the M3 type and the M6 type, with different widths. This machine has been designed with miniaturization and low cost in mind, and compared to the previous model, it realizes space-saving, high quality, and low price, which significantly reduces the production cost per unit of production volume.

The main parameters are as follows.
Power supply: 3-phase 200V (50/60Hz)
Power supply: M3 module: 0.6KVA M6 module: 0.6kVA
M3S module: 0.8KVA M6S module: 1.0KVA
Air source: 0.5MPa
Display: Video monitor/operation monitor
Coating color: module cover: silver, module body: white, base: grey
Ambient condition: Temperature: 15℃ to 35℃.
Humidity: 30% to 80