Supply XPF Stopper AGGPH2711

[XPF Silencer

Product Name：XPF Stopper

English name：STOPPER

Material No.: AGGPH2711

Use: XPF

How to distinguish between SMT FUJI original parts and imitation parts:

Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.

Imitation:
Poor material, not wear-resistant, shorter service life;
Poor precision, which has an impact on the quality of the mounting;
Smaller suction nozzle holes, easy to plug the holes, resulting in insufficient vacuum, poor pick-up, throwing material serious;
Reflective effect is poor, recognize the suction nozzle is easier to cause recognition error.

XP143E machine, belonging to FUJI Fuji in 2005 launched the market compact high-speed mounter, it has a small size, speed, applicability, cost-effective advantages.
The XP143E is a full-image mounter that realizes high-speed placement and compact machine space, and can be used for high-speed placement of small chip components to medium-sized components (25 x 20mm) and further to BGA and CSP (20 x 20mm).

The main parameters are as follows.
Mounter speed: 25000 cph (12 nozzle) ; 9000 cph (1 nozzle)
Mounter accuracy: +/- 0.050mm @3 sigma (chip); +/- 0.040mm @3 sigma (QFP).
Board size: 50 X 50mm -- 457 X 356 mm
Component size: 01005 X 20 mm (12 nozzle); 0402 X 150 mm (1 nozzle)

The main parameters of NXT are as follows.
Power supply: 3-phase 200V (50/60Hz)
Power supply: M3 module: 0.6KVA M6 module: 0.6kVA
M3S module: 0.8KVA M6S module: 1.0KVA
Air source: 0.5MPa
Display: Video monitor/operation monitor
Coating color: module cover: silver, module body: white, base: grey
Ambient condition: Temperature: 15℃ to 35℃.
Humidity: 30% to 80