XP143E Encoder Connector Cable DNEH7025

[XP143E Encoder Connection Cable

Product name：XP143E Encoder cable
English name: HARNESS
Material No.: DNEH7025
Use：XP143E

How to distinguish between SMT FUJI original parts and imitation parts:

Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.

Imitation:
Poor material, not wear-resistant, shorter service life;
Poor precision, which has an impact on the quality of the mounting;
Smaller suction nozzle holes, easy to plug the holes, resulting in insufficient vacuum, poor pickup, throwing material serious;
Reflective effect is poor, recognize the nozzle is easier to cause recognition error.

The XP143E is a high-speed mounter that realizes high-speed placement and a compact machine space with a full-image system, and it can be used for high-speed mounters from small chip components to medium-sized components (25 x 20mm) and further to BGA and CSP (20 x 20mm).
The main parameters are as follows.
Mounter speed: 25000 cph (12 nozzle) ; 9000 cph (1 nozzle)
Mounter accuracy: +/- 0.050mm @3 sigma (chip); +/- 0.040mm @3 sigma (QFP).
Board size: 50 X 50mm -- 457 X 356 mm
Component size: 01005 X 20 mm (12 nozzle); 0402 X 150 mm (1 nozzle)

The main parameters of NXT are as follows.
Power supply: 3-phase 200V (50/60Hz)
Power supply: M3 module: 0.6KVA M6 module: 0.6kVA
M3S module: 0.8KVA M6S module: 1.0KVA
Air source: 0.5MPa
Display: Video monitor/operation monitor
Coating color: module cover: silver, module body: white, base: grey
Ambient condition: Temperature: 15℃ to 35℃.
Humidity: 30% to 80