XP143E Q-axis Motor Signal Cable DNEH702

Q-axis motor signal cable

Product name：Q-axis motor signal cable
English name：HARNESS
Material No.: DNEH702
Use：XP143E

How to distinguish between SMT FUJI Fuji original parts and imitation parts:

Original:
Better material, wear-resistant, longer service life;
High precision, good mounting effect;
Smooth nozzle hole, not easy to block the hole;
Reflective effect is good, recognize the nozzle is more accurate.

Imitation:
Poor material, not wear-resistant, shorter service life;
Poor precision, which has an impact on the quality of the mounting;
Smaller suction nozzle holes, easy to plug the holes, resulting in insufficient vacuum, poor pick-up, throwing material serious;
Reflective effect is poor, recognize the nozzle is easier to cause recognition error.

The XP143E is a high-speed mounter that realizes high-speed placement and a compact machine space with a full-image system, and it can be used for high-speed mounters from small chip components to medium-sized components (25 x 20mm) and further to BGA and CSP (20 x 20mm).

The main parameters are as follows.
Mounter speed: 25000 cph (12 nozzle) ; 9000 cph (1 nozzle)
Mounter accuracy: +/- 0.050mm @3 sigma (chip); +/- 0.040mm @3 sigma (QFP).
Board size: 50 X 50mm -- 457 X 356 mm
Component size: 01005 X 20 mm (12 nozzle) ; 0402 X 150 mm (1 nozzle)

Standard description:
Electronic board size: Maximum: 457 X 356 mm; Minimum: 50 X 50 mm
Electronic board thickness: 3--4.0mm
Component types: maximum 100 types (front side, rear side each 50 types)
Circuit board loading time: 4.2 seconds
Mounting Accuracy:±0.050mm cpk≧1.00 : Rectangular components, etc.; ±0.040mm cpk≧1.00 : QFP, etc.
Mounting Speed：0.165/second/piece，21,800pcs/hour：Rectangle Component；0.180/second/piece，20,000pcs/hour：0402
Object component: 0402-25mm*20mm Maximum height: 6mm
Machine dimensions: L: 1,500mm/W: 1,300mm/H: 1,408.5mm (excluding signal towers)
Machine weight: Approx. 1,800KG (main body)